2. Wells and exterior decoration

Users can consider the design of elevator cabin, door panels, door jambs, and elevator man-machine interfaces. According to the villa's decoration style combined with the villa's structure and design, choose to determine the use of modern minimalist, European, American, Chinese or other styles. Cabin materials can choose color steel, stainless steel, wood ornaments, relief and other materials, configure the LED glare and lighting.

In addition, elevator styles and designs can also be selected based on the type of shaft that is provided. For example, a closed shaft in a concrete shaft can be selected as a closed car, and a shaft with glass or an out-door shaft can be equipped with a multi-side sightseeing or single-sided sightseeing car.

The door system is a crucial part of elevator safety. There are usually two kinds of door opening methods for villa elevators: automatic doors and manual doors. It is advisable to choose the automatic door as far as the space in the well permits. The automatic doors are equipped with car doors and landing doors. The running control of the car doors and landing doors has electrical and mechanical safety interlocking devices to ensure the safety of the elevators. If manual doors are used due to space conditions, safe and reliable manual doors with electromechanical interlocking should be used. The security system must choose a two-way security system. If you want to have security protection during a sudden power outage, you can add an automatic rescue system. In addition, it is recommended that the local extension of the car should be connected to the alarm to call for help when the fault is prevented.

5. Other factors considered

5.1 Car plane layout and dimensions

In order to save area, it is recommended to use a double-leaf open automatic door. Well width determines car and door width. General well width 1200MM corresponding to car width 800MM opening width 650MM; 1350MM corresponds to 950MM and 750MM, and 1500MM corresponds to 1100MM and 800MM. Shaft depth minus 350 is the car depth. For example, the well 1200 corresponds to the car 850MM. The outer diameter of the shaft will be slightly larger because of the well frame or wall. In the case of space permitting, the car can be designed with a larger size to increase the ride comfort.

In the event that certain well space space is limited, WELLS can relatively improve the utilization of the well space through special design.

5.2 Height of pit and car top

The pit is for installing buffers and for holding the bottom of the car. The top layer needs to install a traction machine. Some of the villas in the loft or finished decoration are unable to dig the pit. You can choose WELLS 'elevator of the villa without the pit. If the top height is lower than 2800, you can choose the design of low top height. For specific solutions, you can consult with the technical personnel of WELLS.

5.3 Main parts

It is recommended to use permanent magnet synchronous traction machine, VVVF inverter drive, 32-bit microcomputer board automatic control and automatic door. Because the traction machine technology is very mature, high efficiency, energy saving and environmental protection, low maintenance costs. The microcomputer board has stable performance and complete functions. You can consider the power failure emergency leveling function in case. Door entry security uses 128 light curtains. The contactor is silent type, and the guide boot is roller type or vibration-proof.

5.4 Speed

The speed of villa elevators is usually 0.25~0.4m/s. There are not many floors in a villa or private home, so the elevation will not be too high. The speed does not have to be too fast and not too slow, it is recommended to choose a speed of 0.4m/s. The speed is low, then the operation is too slow, and the operation efficiency is low. The speed is high, the height of the top floor and the height of the pit are correspondingly increased, and the motor power also needs to be increased.

1. Installation location, shaft space and elevator specifications

Location determines shaft space and elevator size. Usually a reasonable home elevator or villa elevator is installed in the middle of a corridor, on the side of a corridor, on a corner, or on a wall. The well space can be determined according to the environment. The elevator load capacity is recommended to be 3-4 persons, 225-320KG, and the car size is 0.8-1.2 square meters.

Need to consider the convenience of elderly people and users may use mobile assistance equipment in a certain period of time. Such as: wheelchair, wheelchair size is width 680mm, length 930mm. Therefore, the elevator car must be more than 700mm wide, preferably 800mm or more, 1000mM deep, and the door opening size needs to be 800mm, otherwise the wheelchair cannot be pushed. The area of the car relative to the load may be greater than the prescribed area of the passenger lift and the load ratio, to increase comfort.

3. Individual design

Individual design is according to the architectural characteristics and decorative style of the villa, as well as the identity, temperament and hobbies of the user, to choose the elevator that matches it. The villa itself has its own unique personality, and the owners and decorators will use different building structures and styles to reflect the individuality. For this reason, villa elevators that are matched with villas will inevitably become an important element of individualization. Otherwise, they will lose their individuality and will reduce the taste of villas.

4. Function and safety measures

Safe and reliable is, of course, the most critical aspect of choosing an elevator. It is recommended that users require that manufacturers must design and manufacture in accordance with the national standard GB/T 21739-2008 “Home Elevator Manufacturing and Installation Specifications”. And require a third party to test whether it meets the relevant safety standards.

Users of home elevators usually lack elevator expertise. There is no professional elevator technology and service personnel to give selection and use guidance. Safety and reliability need to be taken seriously. Therefore, when selecting suppliers, companies and manufacturers with certain manufacturing and professional experience must be selected.

Install home elevators or villa elevators, not just buy a product or equipment. After deciding to install a home elevator or a villa elevator, it is necessary to go through elevator shaft planning, elevator specification, brand selection, interior design, civil construction, installation and commissioning, after-sales and maintenance and other links. It is also a time-consuming thing in home decorating. To save trouble and money, avoid worries about the future. Professional manufacturers with professional qualifications and rich experience should be selected to obtain comprehensive and long-term stable services.