The Wheelchair platform provides a convenient way for handicapped person to access building or public place, WELLS Wheelchair Platform platform applies high strength aluminum profile to guide vertical movement,whichenable to achievesmooth and safe lifting; meanwhile, it introduces aluminum static blasting painting chassis and panels, possessing top grade appearance. It can be directly installed into the ground without architectural supporting pits and easy to operate,according to the installationenvironment, there are two types, in door or outdoor.

TechnicalSpecification 

Platform size:           1370mm *892mm

Overall Dimensions:     1370mm*1200mm*L mm

Maximum Lifting Height:  6000mm

Minimum Height of the Lifting Bottom-plate: 65mm

Entry & Exit Mode:      90°or180°

Lifting Speed:          60mm/s

Maximum Load Capacity: 350KG

Control Source:        24V/DC

Motor Power:          0.8KW，24V/DC/or 1.5KW,220V/AC

Battery Supply:        24V/DC, 30A/H secondary battery ( for DC only)

Power Supply:         220V/50HZ/25A

Drive System:          Hydraulic driven or screw driven

Running Mode:         Jogging control or automatic control

Installation Mode:      directly fixed on the concrete ground

Control Device:         The calling boxcan be installed on the equipment,

the wall or remote control device

Emergency Stop：       The operation can by stopped by pressing emergency button

Manual Operation：     The lifting bottom-plate can be manually descended by manually open the hydraulic Valve or manually rotating the screw.

Safety Device

Safety Interlocking：The lifting platform shall not run if any improper operation

Safety Edge：The operation will be stopped immediately when the safety edge meets obstacles during operation.

Emergency Descending：When there is no power or malfunctions, manually operate the descending device

Safety Wane：The front/back wane shall cock up during lifting process